|
| |
|
MINI POWERAM Model 1825
Hydraulic Rod Pusher/Puller
|
|
BACK |
POWERRAM 1825 |
|
MINI
POWERAM Model 1825 Hydraulic Rod
Pusher/Puller |
|
The
Poweram Model 1825 is about 1 3/4 times more powerful than the Model 1425,
but it doesn't take any more space (it fits into the same shoring box)!
It is a good choice for tough crossings in tight quarters.This compact
machine installs new underground utilities by pushing steel rods under
roadways, etc. and pulling the required pipe or cable back; and it
can replace existing lines by pulling pipe splitting and/or bursting tools
through the old pipe and pulling a new pipe into the same space. The new
pipe can be the same size or larger than the old pipe.
The Model 1825 is normally used for water, gas, electric, telephone, and
cable TV services, as well as sewer laterals, traffic signals, street
lighting, and irrigation installations.
One person can operate the model 1825. It has two hydraulic cylinders
controlled by one valve, which puts the operator in control of the machine
and his/her own safety. The cylinders actuate the patented jaw system that
grips the push rods. The centerline of the push rod is 5 inches above the
bottom of the machine. The Model 1825 can pull up to 8" pipe in most soil
conditions. Larger pipe can be installed in suitable soils. The longest
practical distance for accuracy depends on soil conditions and operator
experience. Using an electronic locating devise helps the operator make
critical decisions that can greatly increase productivity. We recommend
using the No. 363 Safety Shoring Box to protect the operator and to provide
a faster and more stable set-up.
Poweram push/pull rods have threaded joints; no couplings are required. They
can be added and removed within the length of the machine. The strong,
course threads require only 3 ½ turns to seat. The Poweram jaw system grips
the rods tightly without creating sharp, dangerous steel slivers. The 14
inch stroke cylinders pull the 3 ft. long rods in three "bites", and allow
room to bring the pipe or cable into the machine to finish the pull. |
|
Specifications - MINI
POWERAM Model 1825 Hydraulic Rod
Pusher/Puller |
|
 | 75,400 pounds of pushing capacity at 3,000 psi |
| 64,800 pounds of pulling capacity at 3,000 psi |
| 18 " wide x 18" high x 52" long |
| Machine weight approximately 615 pounds |
| 14" stroke hydraulic cylinders (2) |
|
|
Accessories
- MINI POWERAM Model 1825 Hydraulic
Rod Pusher/Puller |
|
| Safety Shoring Box |
| Accessory Tote Box |
| Portable Hydraulic Power Unit |
| Alloy steel push rods - Solid and Hollow rods are available |
| Push heads |
| Expanders & Couplings for pulling up to 8" pipe |
| Expanders for pulling 2 or more pipes at once |
| Electronic Locating equipment |
| Pipe Splitting systems for up to 4" pipe |
| Pipe Bursting systems for up to 8" pipe |
|
|
